Independent MOT lookup tool — not affiliated with DVSA, DVLA or gov.uk.
GB
MOTCHECKER

Most Common MOT Failure Reasons and How to Avoid Them

Updated October 2026 · 6 min read · By the MOT Checker UK editorial team

DVSA publishes statistics on why vehicles fail their MOT. The exact percentages change from year to year, but the pattern is very stable: lighting and signalling is consistently the largest category, followed by suspension, brakes, tyres and the driver's view of the road. Most of these are wear items, which means they build up gradually and can usually be spotted early.

1. Lights, reflectors and electrical equipment

This category includes headlights, brake lights, indicators, number plate lights and fog lights. The most frequent causes are blown bulbs, cracked or water-logged lenses, and headlights that are incorrectly aimed. Bulbs are inexpensive, but modern cars may need a lens or housing removed to fit one, so it is worth checking in advance. Headlight aim can also be affected by a heavy load.

2. Suspension

Potholes, speed bumps and age wear out shock absorbers, bushes, ball joints and springs. Testers look for leaks from shock absorbers, excessive play in joints, corroded or broken coil springs and damaged mountings. Warning signs include knocking over bumps, a bouncy ride and uneven tyre wear. Suspension repairs can be expensive, so noises should not be ignored.

3. Brakes

The test measures how well the brakes work and how evenly they work, using a roller brake tester. Defects include worn pads and discs, seized callipers, an unbalanced braking effort between the sides, corroded brake pipes, leaking fluid and a handbrake that does not hold. A lit ABS warning light will also be recorded. If the car pulls to one side under braking or the pedal feels different, get it inspected.

4. Tyres

Tread depth below 1.6mm is the most obvious failure, but testers also look for cuts, bulges, exposed cords, tyres rubbing on the bodywork and incorrect sizes or types on the same axle. Uneven wear can point to alignment or suspension faults. Replace tyres before they reach the limit, because tyres at the legal minimum have much weaker wet grip.

5. Driver's view of the road

Worn wipers, empty washers and windscreen damage all fall under this heading. Damage larger than 10mm directly in front of the driver, or 40mm elsewhere in the wiped area, can be a failure. Windows or mirrors that obstruct the view, or tint that is too dark, can also be recorded.

6. Body, structure and corrosion

Rust is a failure when it weakens a key structural area, such as the sills, subframes or the mounting points for suspension and seatbelts. Sharp edges from damaged panels are also recorded because they can injure pedestrians. Surface rust on its own is not a failure, but it is worth treating before it spreads.

7. Emissions and exhaust

Petrol cars are tested for exhaust emissions, and diesels for smoke. Since 2018, a diesel particulate filter that has been removed or visibly tampered with is a major defect. A leaking or very noisy exhaust can fail as well. A car that is running badly, or has an engine warning light, should be checked before the test.

8. Seatbelts, plates and identification

Every seatbelt must latch, retract and be free of damage. Registration plates must be legible and correctly formed, and the vehicle identification number must be present where it should be. These are quick to check and cheap to fix.

How to avoid a surprise

  • Work through our pre-MOT checklist a week before the test.
  • Look at last year's advisories on the car's MOT history, because they are the most likely failures.
  • Fix cheap items yourself, such as bulbs and wipers, and get quotes for expensive ones.
  • Keep the car's service history up to date. Regular servicing catches many of the same faults.
  • If you are unsure, ask a garage for an inspection before booking the test.

If your car does fail, read our guide to MOT retest rules so you know when a retest is free and how long you have.

Check a vehicle now. Enter any UK registration on our MOT checker to see its MOT status and expiry date.

Sources and further reading

Rules and fees change, so always confirm the latest position on the official pages: GOV.UK: Getting an MOT and GOV.UK: Check MOT history. This guide is general information, not professional advice.